The easy way to remove the cloth is to cut it and strip it lengthwise. Unrolling in sections is much more difficult and time consuming.
- Aaron Englert
That is helpful because we prefer to ship the tubes with the peel ply still on for protection during shipping.
CARBON EPOXY |
ROCKET AIRFRAME TUBES
|BASE SHIPPING CHARGE||$8.00|
|ADDED SHIPPING CHARGE FOR 5 AND 6 INCH TUBES||$20.00|
|OR ADDED SHIPPING CHARGE FOR 10 AND 12 INCH TUBES||$40.00|
|29mm fits BT-11 or BT-1.14 fiberglass, paper, plastic and wood internal mating parts.
38mm fits BT-15 or BT-1.52 fiberglass, paper, plastic and wood internal mating parts. 54mm is a custom size. 75mm fits BT-30 or BT-3.00 parts.
98mm fits BT-39 or BT-3.90 fiberglass, paper, plastic and wood internal mating parts. 4 inch is a custom size. 5 inch is a custom size.
6 inch fits fiberglass, paper and wood internal mating parts. 10 inch is a custom size. 12 inch fits fiberglass, paper and wood internal mating parts.
Some other suppliers have mating parts for the custom sizes. BT-11, 15, 30, 39 are our tube
and part sizes. 54mm fits into our 2.25" OD paper or fiberglass tubing. If you need custom paper or ply parts to fit, please ask.
We can slot the tubes and even make the thickness more for an "at cost" add-on.
We can make CF fins of course for a reasonable cost. We can add CF to attach points,
but the increased assembled size adds considerable shipping cost as quoted.
Copyright © 1980-2015, U.S. Rockets, all rights reserved!