BABY BIG ROCKET 12|
BABY BIG ROCKET 12
is a kit with paper tubes and NOSE CONE, plywood fins through the wall,
dual deployment capable, 152mm "Host Mount-tm", and includes
"Interchange Mount-tm" for 98mm and 75mm. Customer provides
parachutes, motors, and if needed, fiberglass layering for
motors M or higher. Can accept optional "Interchange Mounts-tm". The large
stable design makes BABY BIG ROCKET 12 excellect for large payload
or sport flights. Try an on-board camera in the large payload
compartment! BABY BIG ROCKET 12 can accomodate J, K, L, M, N motors.
|BABY BIG ROCKET 12
can be slightly modified to
accept new dual deployment systems and altimeters. The payload
can be deployed on both sides of
the coupler or both sides of the payload tube.
|All U.S. Rockets Custom 12 Inch
feature feature pre-cut plywood
fins, heavy duty airframe tubes, strong recovery harness,
and flight instructions, and all the high quality
parts needed to
successfully assemble and fly a high power rocket.
parachutes, glue, sandpaper, sealer and paint not
included. Please Note: At this advanced level the user is
expected to provide his
own parachutes, altimeter, and where appropriate
fiberglass layer. All
USR kits are dual deployment capable.