U.S. ROCKETS
U.S. Rockets logo
More power to you!!
Genesis of LMR & HPR.

WARP-3


WARP-3 was originally designed and specified to address the needs of rocketeers with primarilly model rocket construction skills but with a need for a rocket which could withstand the growing power requirements of MR and HPR in the E, F, G, H power. It is a beefy rocket. Extra high strength components throughout facilitate flights over Mach 1 despite the large size and helps to withstand hard landings. The 29mm mounts accept motors E to H as well as Interchange Mounts-tm for 24mm. Extra thick plywood fins and rings and double strength aerospace specification tubing. WARP-3 is an advanced high performance payloader and can withstand repeated high power firings. Try E10-8, F20-8, F80-12, G008-8, G30-8. Or try the new Estes E16, three of which still keep you under both the model rocket propellant mass and liftoff mass limits!



SPECIFICATIONS
Skill 3
Motors 3x 29mm
Recovery Parachute
not included
Diameter 2.70"
Length 46"
Weight 350g
Drag (CD) 0.38
CP(") 33.84
SKU# 1044
Price $69.95
Definition Of Terms


WARP-3 can be slightly modified to accept new dual deployment systems and altimiters. The payload can be deployed on both sides of the coupler or both sides of the payload tube. This rocket is recomended for schools, recreation programs and science work. It flies surprisingly well on 24mm D12-5 or E12-4. Best flights are with USR F20-8 or G008-8. WARP-3 has been successfully tested with as high of power as 3 H80-12 and as high thrust as 3 H240-12. It was originally designed and specified to address the needs of rocketeers with primarilly model rocket construction skills.

The tubes are over twice as thick as conventional model rocket tubes, yet the tubes are constructed of the same very high specification materials as model rocket tubing, which itself is the finest in the world. Its very strong and lightweight construction makes it fly surprisingly high compared to other rocket kit brands. Test it for yourself! The main mounts are 29mm and through the wall attach goes to these tubes.


All U.S. Rockets Large Sport Series kits feature pre-cut plywood fins, heavy duty airframe tubes, strong elastic shock cord, illustrated assembly and flight instructions, decal and all the high quality parts needed to successfully assemble and fly a high performance model rocket. Launcher, parachute, motors, glue, sandpaper, sealer and paint not included.



parts
Kit parts

onpad
John Hornsby and his U.S. Rockets Warp ready for flight.

inflight
John Hornsby's Warp liftoff!

back
A customer built Warp-3 rear view.

h
Warp-3 side view.

recovery
Warp-3 recovery view.


| KITS |


Copyright © 1979 - 2014, U.S. Rockets, all rights reserved!