SHOOTING STAR 4
SHOOTING STAR 4
is designed especially for
75mm and 54mm rocket motors. It has "Triple Thickness Airframe Tube"-tm
and thick plywood rings and fins, mounted through the wall, to
allow high thrust flights while maintaining easy paper and wood
construction and finishing. Plastic nose cone. You can still build your bird the night
before the launch and have no power limits! A new era of strength
and power have begun. More power to you!!
- Extra thick wall 4 inch tube
- Thick plywood fins
- Thick centering rings
- Through the wall fin attach
- Large "Host Mount"-tm
- "Unlimited Length Motors"-tm
- Two styles of motor hard mounts
- Recovery hard mount
- Triple deploy
- Disassembly for transport and servicing
|SHOOTING STAR 4
75mm "Host Mounts-tm" were INTRODUCED to HPR
in the 80's so this is a time tested
motor mounting system. My how times have changed with reloadables
hybrids to add to the mix of time tested and convenient
expendables. SHOOTING STAR 4 has kept up to date by supporting ANY
length motor in the "Host Mount"-tm and with the included
"Interchange Mount-tm" for 66mm and 54mm. The 66mm "Interchange Mount-tm" directly
fits 2.5" RATTWORKS Hybrid motors!|
The 66mm "Interchange Mount-tm" can accept a variety of
other optional "Interchange Mounts-tm"
(not included) such as 38mm, 29mm, 3x29mm, 4x24mm.
The 75mm "Interchange Mount-tm" can accept a variety
of other optional "Interchange Mounts-tm"
(not included) such as 4x29mm.
|All U.S. Rockets PROTOTYPE
feature pre-cut plywood fins, heavy duty airframe
harness, illustrated assembly and flight instructions, and
all the high
quality parts needed to successfully assemble and fly a high
rocket. These kits represent the state
of the art in technology, performance and cost efficiency.
They use USR
standards such as "Interchange Mounts-tm". They feature
parts such as aerospace specification airframe tubes,
plywood fins, wood or plastic nose
Launcher, motors, parachutes, glue, sandpaper, sealer and paint not